here’s an exploded view of the dyno design. The main wheel has been sized to suit the types of bikes that I will be testing: bikes from the 70’s and 80’s, mainly airheads. The red wheels are removeable and can be installed to cater for bikes with more horsepower. A disk brake is incorporated to save the bike’s rear brake. Also, there is plenty of room for a motor and electric clutch to be installed at a later date so that the wheel can be used to start race bikes.
http://skrunkwerks.com/skrunk/wp-content/uploads/2013/07/Dyno3D_main_module_explode.jpg 628 800 adrian http://skrunkwerks.com/skrunk/wp-content/uploads/2013/07/Skrunkwerks_Main_Horiz_whtsmall.png adrian2013-08-24 11:11:102013-12-30 21:07:20dyno - exploded view